In case you are planning on buying a case to your iPad, it is very important know the proper measurement. The identical goes should you simply need to know the mannequin of your iPad. There are just a few alternative ways to measure the dimensions of your iPad, relying on whether or not you will have the machine readily available or not. On this article, we’ll give you step-by-step directions on learn how to measure the dimensions of your iPad, whatever the mannequin.
When you have your iPad readily available, the best strategy to measure the dimensions is to make use of a ruler or measuring tape. Measure the size and width of the iPad, from edge to edge. The size is the measurement from the highest to the underside of the iPad, whereas the width is the measurement backward and forward. After getting the size and width, you should utilize the next desk to find out the dimensions of your iPad:
| Size (in) | Width (in) | Dimension |
|---|---|---|
| 9.7 | 7.0 | 9.7-inch iPad |
| 10.2 | 7.5 | 10.2-inch iPad (seventh and eighth era) |
| 10.5 | 7.9 | 10.5-inch iPad Professional |
| 11.0 | 8.1 | 11-inch iPad Professional (1st, 2nd, and third era) |
| 12.9 | 8.7 | 12.9-inch iPad Professional (1st, 2nd, third, 4th, and fifth era) |
Measuring the Bodily Dimensions
Earlier than discussing the technical dimensions of an iPad, it is important to grasp the bodily measurements. These dimensions straight affect the machine’s portability, consolation of use, and compatibility with equipment. This is an in depth information on measuring the bodily dimensions of an iPad.
1. Size and Width
To measure the size and width of the iPad, you may want a ruler or measuring tape. Place the ruler alongside the machine’s longest facet, from one edge to the opposite. Document the measurement in inches or centimeters. Repeat the method for the width, which is the shorter facet perpendicular to the size. The size sometimes corresponds to the peak of the iPad when held in portrait mode, whereas the width corresponds to the width in portrait mode or the peak in panorama mode.
2. Peak
The peak of an iPad is measured by putting the machine on a flat floor with the display screen going through up. Use a ruler or measuring tape to measure from the underside edge to the highest fringe of the machine. This measurement is often taken when the iPad is in portrait mode. The peak is necessary for figuring out the machine’s general measurement and for guaranteeing compatibility with instances and docks.
3. Thickness
To measure the thickness, place the iPad on its facet and use a ruler or caliper to measure from the highest edge to the underside edge. This measurement is mostly taken on the thickest level of the machine, which can differ relying on the mannequin and design. The thickness can affect the machine’s portability and luxury of holding it for prolonged intervals.
Calculating the Display Dimension Diagonally
The commonest technique for measuring the dimensions of an iPad is to calculate the display screen measurement diagonally. That is completed by measuring the gap from one nook of the display screen to the alternative nook. The result’s the diagonal size of the display screen, which is usually expressed in inches.
To calculate the display screen measurement diagonally, you will want a ruler or measuring tape. Place the ruler or measuring tape alongside the diagonal of the display screen, from one nook to the alternative nook. Make it possible for the ruler or measuring tape is straight and that it’s not touching the bezel of the display screen.
After getting measured the diagonal size of the display screen, you should utilize the next desk to find out the dimensions of your iPad:
| Diagonal Size (inches) | iPad Mannequin |
|---|---|
| 7.9 | iPad mini |
| 9.7 | iPad (2018) |
| 10.2 | iPad (2021) |
| 10.5 | iPad Air (2019) |
| 11 | iPad Professional (2018) |
| 12.9 | iPad Professional (2018) |
Figuring out the Facet Ratio
To find out the facet ratio of an iPad, it’s essential to measure the display screen’s width and top. The facet ratio is usually expressed as a ratio of the width to top, similar to 4:3 or 16:9. Listed below are detailed steps on learn how to measure the iPad’s display screen dimensions:
-
Measure the Width
Use a ruler or measuring tape to measure the horizontal distance throughout the iPad display screen from the left edge to the fitting edge. Document this measurement in millimeters (mm) or inches (in).
-
Measure the Peak
Subsequent, measure the vertical distance from the highest fringe of the iPad display screen to the underside edge. Document this measurement in mm or in.
-
Calculate the Facet Ratio
Divide the width measurement by the peak measurement to acquire the facet ratio. For instance, if the width is 240 mm and the peak is 160 mm, then the facet ratio could be 240/160 = 3:2.
The next desk summarizes the facet ratios of various iPad fashions:
iPad Mannequin Facet Ratio iPad (1st era) 4:3 iPad 2 4:3 iPad 3 4:3 iPad 4 4:3 iPad Air 4:3 iPad Air 2 4:3 iPad Professional (9.7-inch) 4:3 iPad Professional (10.5-inch) 4:3 iPad Professional (11-inch) 4:3 iPad Professional (12.9-inch) 4:3
Using On-line Instruments for Accuracy
There are quite a few on-line instruments that may present fast and correct measurements to your iPad. These instruments sometimes require you to enter the mannequin or dimensions of your machine. Listed below are just a few standard choices:
| Instrument | Options |
|---|---|
| Apple Assist | Official measurements supplied by Apple |
| Speccy | Detailed {hardware} info, together with machine dimensions |
| iFixit Restore Guides | Detailed measurements and directions for machine repairs |
To make use of these instruments, merely go to the web site and enter the mannequin or dimensions of your iPad. The device will then give you the corresponding measurements.
Utilizing a Bodily Ruler or Measuring Tape
Should you favor a extra hands-on method, you should utilize a bodily ruler or measuring tape to measure your iPad. To do that, place the ruler or tape alongside the sting of the machine and skim the measurement. Be sure that you measure from the sting of the display screen to the sting of the machine, together with any bezels or frames.
Contemplating the Facet Ratio
When measuring the dimensions of your iPad, it is also necessary to think about the facet ratio. This refers back to the ratio of the width to the peak of the display screen. For instance, an iPad with a 4:3 facet ratio may have a distinct display screen measurement than an iPad with a 16:9 facet ratio, even when they’ve the identical diagonal measurement.
Further Suggestions for Correct Measurement
* Use a high-quality ruler or measuring tape for exact measurements.
* Measure from the middle of the display screen to keep away from any distortion.
* If doable, use a device that gives measurements in each inches and centimeters.
* Evaluate your measurements with the official Apple specs to make sure accuracy.
Assessing the Decision
The decision of an iPad, measured in pixels, refers back to the variety of particular person pixels displayed on its display screen. Greater resolutions lead to sharper and extra detailed pictures. To measure the decision of an iPad, observe these steps:
- Navigate to the “Settings” app in your iPad.
- Faucet on “Show & Brightness”.
- Scroll right down to the “Decision” part.
- The present decision of your iPad will probably be displayed right here.
- Faucet on “Extra Resolutions” to see an inventory of different resolutions out there to your machine.
- Measure the peak from the highest of the show to the underside.
- Measure the width from the left fringe of the show to the fitting edge.
- Measure the thickness at its thickest level, often alongside the facet the place the buttons are positioned.
- Millimeters to inches: To transform millimeters to inches, multiply the variety of millimeters by 0.0393701.
- Centimeters to inches: To transform centimeters to inches, multiply the variety of centimeters by 0.393701.
- Ft to inches: To transform ft to inches, multiply the variety of ft by 12.
- Obtain and set up the appliance from the App Retailer.
- Open the appliance and observe the directions on the display screen.
- Level the machine’s digicam at your iPad.
- Measure the size, width, and top of your iPad utilizing the app’s instruments.
The out there resolutions for every iPad mannequin differ relying on its display screen measurement and {hardware} capabilities. Some widespread resolutions for iPads embody:
| iPad Mannequin | Decision |
|---|---|
| iPad (ninth era) | 10.2 inches, 2160 x 1620 pixels |
| iPad Air (fifth era) | 10.9 inches, 2360 x 1640 pixels |
| iPad Professional 12.9-inch (sixth era) | 12.9 inches, 2732 x 2048 pixels |
Checking the General Dimensions
To precisely measure the general dimensions of your iPad, confer with the official specs supplied by Apple or confer with the consumer handbook that got here together with your machine. The scale differ relying on the particular iPad mannequin and era.
This is a desk offering the general dimensions for the newest generations of iPad fashions:
| Mannequin | Peak | Width | Thickness |
|---|---|---|---|
| iPad Professional 12.9-inch (fifth era) | 11.04 inches (280.6 mm) | 8.46 inches (214.9 mm) | 0.25 inches (6.36 mm) |
| iPad Professional 11-inch (third era) | 9.74 inches (247.6 mm) | 7.02 inches (178.5 mm) | 0.23 inches (5.9 mm) |
| iPad Air (fifth era) | 9.76 inches (247.6 mm) | 7.03 inches (178.5 mm) | 0.24 inches (6.1 mm) |
| iPad mini (sixth era) | 7.69 inches (195.4 mm) | 5.30 inches (134.8 mm) | 0.28 inches (7.2 mm) |
When measuring the size, preserve the next in thoughts:
Understanding Show Phrases
Show measurement: Measured diagonally from nook to nook, excluding any rounded edges or bezels (ie. the body across the display screen). Show measurement is usually expressed in inches.
Facet ratio: The ratio of the show’s width to its top. Frequent facet ratios embody 4:3 (sq.), 16:9 (widescreen), and 16:10 (wider than widescreen).
Decision: The variety of pixels displayed on the display screen. Decision is usually expressed by way of the variety of pixels within the horizontal path by the variety of pixels within the vertical path (e.g., 1920×1080).
Pixel density: The variety of pixels per inch (PPI) of the show. Pixel density impacts the readability and sharpness of the picture, with larger pixel densities leading to sharper pictures.
Shade depth: The variety of bits used to symbolize every pixel’s colour. Shade depth impacts the vary and accuracy of colours that may be displayed, with larger colour depths leading to extra vibrant and correct colours.
Show kind: The kind of expertise used to show the picture, similar to LCD (liquid crystal show), OLED (natural light-emitting diode), or IPS (in-plane switching). Completely different show sorts provide totally different benefits and drawbacks by way of picture high quality, colour accuracy, and viewing angles.
Retina show: A high-resolution show with a pixel density that’s excessive sufficient that the person pixels are usually not seen to the human eye at a typical viewing distance. Retina shows present sharp and clear pictures which might be simple on the eyes.
| Show Dimension (inches) | Facet Ratio | Decision | Pixel Density (PPI) |
|---|---|---|---|
| 9.7 | 4:3 | 1024 x 768 | 264 |
| 10.2 | 4:3 | 1024 x 768 | 326 |
| 10.5 | 4:3 | 1668 x 2224 | 265 |
| 10.9 | 4:3 | 1668 x 2388 | 264 |
| 12.9 | 4:3 | 2048 x 2732 | 265 |
| 11 | 16:10 | 2388 x 1668 | 265 |
| 12.4 | 16:10 | 2560 x 1600 | 265 |
Changing Models of Measurement
Should you’re extra snug measuring with totally different items than inches or centimeters, you’ll be able to simply convert your iPad’s dimensions utilizing the next desk:
| Unit | Conversion Issue to Inches |
|---|---|
| Millimeters (mm) | 0.0393701 |
| Centimeters (cm) | 0.393701 |
| Ft (ft) | 12 |
For instance, to transform the iPad Professional 12.9-inch mannequin’s top of 11.04 inches to millimeters, you’d multiply 11.04 by 25.4 (the variety of millimeters in an inch), which provides you 280.44 millimeters.
This is an in depth rationalization of the conversions:
By following these directions, you’ll be able to simply measure the dimensions of your iPad in any unit of measurement you like.
Utilizing Third-Social gathering Functions
A number of third-party purposes can be found that may show you how to measure the dimensions of your iPad. One standard choice is the Measure app, which is offered without spending a dime on the App Retailer. This app lets you measure the size, width, and top of your iPad utilizing the machine’s digicam. Another choice is the Ruler app, which can also be out there without spending a dime on the App Retailer. This app offers a wide range of measuring instruments, together with a ruler, a protractor, and a tape measure. To make use of a third-party software to measure the dimensions of your iPad:
The next desk summarizes the important thing options of the 2 hottest third-party purposes for measuring the dimensions of an iPad:
| Function | Measure | Ruler |
|---|---|---|
| Value | Free | Free |
| Instruments | Ruler, protractor, tape measure | Ruler, protractor, tape measure |
| Digicam | Sure | Sure |
| Accuracy | Excessive | Excessive |
Evaluating to Different Machine Sizes
When evaluating the dimensions of an iPad to different units, it is useful to think about the size of widespread sizes. This is a desk displaying the size of assorted iPad sizes and their comparability to different units:
| Machine | Show Dimension (inches) | Dimensions (inches) |
|---|---|---|
| iPad mini (sixth era) | 8.3 | 7.9 x 5.3 x 0.24 |
| iPad (ninth era) | 10.2 | 9.8 x 6.8 x 0.29 |
| iPad Air (fifth era) | 10.9 | 9.7 x 7 x 0.24 |
| iPad Professional 11-inch (4th era) | 11.0 | 9.7 x 7 x 0.23 |
| iPad Professional 12.9-inch (sixth era) | 12.9 | 11 x 8.5 x 0.25 |
| iPhone 14 Professional | 6.1 | 5.8 x 2.8 x 0.31 |
| Samsung Galaxy S23+ | 6.6 | 6.2 x 3 x 0.31 |
| MacBook Air (M2) | 13.6 | 11.97 x 8.36 x 0.44 |
| MacBook Professional 14-inch (M2) | 14.2 | 12.31 x 8.91 x 0.61 |
As you’ll be able to see, iPads are available a spread of sizes, from the compact iPad mini to the bigger iPad Professional. When choosing the proper measurement to your wants, contemplate what actions you may be utilizing the machine for. Should you’re primarily utilizing it for studying, shopping the net, or watching movies, a smaller iPad could also be enough. Nonetheless, should you’re planning on utilizing it for extra intensive duties like gaming or video modifying, a bigger iPad with a better decision show could also be a more sensible choice.
The right way to Measure Dimension of iPad
To measure the dimensions of an iPad, it’s good to decide the diagonal display screen measurement. This measurement is usually given in inches and represents the gap from one nook of the display screen to the alternative nook diagonally.
To measure the diagonal display screen measurement, you should utilize a ruler or tape measure. Place the ruler or tape measure alongside the diagonal of the display screen, guaranteeing that it runs from one nook to the alternative nook. The measurement you get hold of would be the diagonal display screen measurement of the iPad.
For instance, should you measure the diagonal display screen measurement of an iPad and acquire a measurement of 9.7 inches, then the iPad has a 9.7-inch display screen.
Folks Additionally Ask
The right way to measure iPad top and width?
To measure the peak and width of an iPad, you should utilize the next steps:
1. Place the iPad on a flat floor.
2. Use a ruler or measuring tape to measure the gap from the highest fringe of the iPad to the underside edge. This offers you the peak of the iPad.
3. Subsequent, measure the gap from the left fringe of the iPad to the fitting edge. This offers you the width of the iPad.
