You probably have misplaced your Kwikset key or have to rekey your lock for safety causes, rekeying it and not using a secret’s attainable. The method requires some persistence and precision, nevertheless it’s a cheap various to calling a locksmith. This information will stroll you thru the steps concerned in rekeying a Kwikset lock and not using a key, making certain that your property stays safe and accessible.
Earlier than embarking on this undertaking, collect the mandatory instruments and supplies. These embody a small screwdriver, a flathead screwdriver, a paperclip, and a brand new set of Kwikset keys. Guarantee your work space is well-lit and free from distractions. Put on security glasses and gloves to guard your self from potential hazards.
Start by eradicating the lock’s faceplate with the small screwdriver. Subsequent, find the C-clip on the lock’s aspect, which secures the cylinder in place. Use the flathead screwdriver to fastidiously pry the C-clip out of its groove. With the C-clip eliminated, gently pull the cylinder out of the lock physique. Now, use the paperclip to depress the small pin positioned contained in the cylinder. Whereas holding the pin down, insert the brand new key into the cylinder and switch it to the locked place. This course of will reset the cylinder to the brand new key, successfully rekeying your Kwikset lock with out the necessity for an unique key.
Gathering Important Instruments
Earlier than embarking on the rekeying course of, it’s essential to assemble the mandatory instruments to make sure a profitable and environment friendly final result.
Important Instruments:
1. Pinning Package: This specialised equipment consists of a wide range of punches and drivers designed for manipulating the pins inside the lock cylinder, enabling straightforward rekeying.
|
Punch Varieties |
Capabilities |
|---|---|
|
Starter Punch |
Initiates the pinning course of by pushing the previous pins out of the cylinder. |
|
Follower Punch |
Helps the starter punch, making certain that the previous pins are absolutely ejected. |
|
Driving Punch |
Inserts the brand new pins into the cylinder, aligning them appropriately. |
2. Key Duplication Machine: This machine permits you to create new keys that correspond to the revised pin configuration, making certain seamless operation with the rekeyed lock.
3. C-Clamps: Two C-clamps are required to safe the lock in place through the rekeying course of, offering stability and stopping any motion that would intrude with the fragile pin manipulation.
4. Security Glasses: Security precautions are paramount when working with instruments. Security glasses shield your eyes from flying particles or unintended software slips.
Eradicating the Lock Cylinder
Earlier than eradicating the lock cylinder, collect the mandatory instruments: a small flathead screwdriver, a paperclip or small nail, and a brand new key. Make sure the door is unlocked and open for security.
- Find the Launch Gap: On the faceplate of the lock, discover a tiny gap, normally close to the deal with. That is the discharge gap.
- Insert Paperclip or Nail: Gently insert a straightened paperclip or small nail into the discharge gap and press inward. It’s possible you’ll encounter slight resistance, however with mild strain, the cylinder ought to slide out.
- Extract the Cylinder: As soon as the cylinder is free, grasp it and pull it straight towards you. It ought to come out easily.
- Examine the Cylinder: Study the cylinder fastidiously. Search for any injury or put on that will have brought about the keying difficulty.
| Instruments Wanted |
|---|
| Small flathead screwdriver |
| Paperclip or small nail |
| New key |
Disassembling the Cylinder
To disassemble the cylinder, observe these steps:
1. Take away the C-clip.
The C-clip is a small, horseshoe-shaped piece of metallic that holds the cylinder in place. To take away it, use a small flathead screwdriver or a pair of needle-nose pliers. Insert the software into the small gap within the aspect of the lock, and gently pry the C-clip off. The cylinder will slide out of the lock as soon as the C-clip is eliminated.
2. Take away the plug.
With the cylinder faraway from the lock housing, maintain it with the keyhole dealing with up. Insert the tip of a small flathead screwdriver into the small gap on the backside of the cylinder. That is the pinhole the place the driving force pins are positioned. Push down on the screwdriver to launch the plug from the cylinder.
3. Take away the driving force pins.
The motive force pins are the small, cylindrical pins which can be positioned within the plug. They’re held in place by springs and key pins. To take away them, use a small choose or a pair of tweezers. Rigorously carry the driving force pins out of the plug, separately. There are normally 5 – 6 driver pins in every cylinder.
| Pin sort | Location | Description |
|---|---|---|
| Driver pin | Plug | Small, cylindrical pin that’s lifted by the important thing |
| Key pin | Cylinder | Small, spring-loaded pin that engages the driving force pin |
| Spring | Inside the important thing pin | Small, cylindrical spring that pushes the important thing pin outward |
Eradicating the Outdated Plugs
To take away the previous Kwikset lock plugs, observe these steps fastidiously:
-
Insert the Rekeying Device
Insert the rekeying software into the lock cylinder from the outside aspect of the door. Push it in till it engages with the retaining ring.
-
Rotate the Rekeying Device
Rotate the rekeying software counterclockwise till the retaining ring is free and will be eliminated.
-
Take away the Retaining Ring
Rigorously take away the retaining ring from the lock cylinder. It could be obligatory to make use of a small screwdriver or pliers to help on this step.
-
Take away the Plugs
As soon as the retaining ring is eliminated, the previous plugs will be simply eliminated by urgent on them with a small screwdriver or punch. The plugs will fall out of the lock cylinder.
Plug Quantity Place in Cylinder 1 Closest to the outside of the door 2 Second from the outside of the door 3 Third from the outside of the door 4 Fourth from the outside of the door (not current in all Kwikset locks)
Inserting the New Plugs
Inserting the brand new plugs is essentially the most essential step within the rekeying course of. Haste or carelessness can injury the lock, so proceed with warning.
Aligning the Plugs
Earlier than inserting the plugs, test if the brand new key aligns appropriately with the plug holes. If it would not, use a small screwdriver or key file to regulate the peak of every plug by tapping on the highest or backside. Make sure that all plugs are completely aligned earlier than inserting them.
Inserting the Driver Plug
The motive force plug is the biggest and has a gap within the heart. Insert the driving force plug into the corresponding gap on the face of the lock. Gently press down on the plug till it clicks into place. Don’t pressure it, as this will injury the lock.
Inserting the Key Pins
Subsequent, insert the important thing pins into the driving force plug. Key pins have a spring and a pin on the backside. Maintain the important thing pin together with your thumb and forefinger, then align the spring with the corresponding gap within the driver plug. Push down on the spring till the pin bottoms out.
Inserting the Grasp Pins
Grasp pins are much like key pins however have a flat high as an alternative of a pin. They create the shear line that determines which key will open the lock. Insert the grasp pins into the holes above the important thing pins. Push them down till they attain the shear line. The shear line needs to be barely beneath the sting of the driving force plug.
Checking Alignment
As soon as all plugs are inserted, test if the important thing nonetheless aligns appropriately. If it does, the rekeying is full. If it would not, recheck the alignment of the plugs and make any obligatory changes.
| Step | Description |
|---|---|
| 1 | Align the plugs with the important thing. |
| 2 | Insert the driving force plug. |
| 3 | Insert the important thing pins. |
| 4 | Insert the grasp pins. |
| 5 | Examine alignment and make changes if obligatory. |
Reassembling the Cylinder
After getting eliminated the core from the lock, you will want to reassemble it as a way to set up it again into the lock. To do that, observe these steps:
- Insert the brand new key into the cylinder and switch it to the locked place.
- Maintain the cylinder in a single hand and the housing within the different hand.
- Align the pins within the cylinder with the slots within the housing.
- Push the cylinder into the housing till it’s absolutely seated.
- Flip the important thing to the unlocked place and take away it.
- Take a look at the lock to guarantee that it’s working correctly.
Here’s a desk summarizing the steps for reassembling the cylinder:
| Step | Description |
|---|---|
| 1 | Insert the brand new key into the cylinder and switch it to the locked place. |
| 2 | Maintain the cylinder in a single hand and the housing within the different hand. |
| 3 | Align the pins within the cylinder with the slots within the housing. |
| 4 | Push the cylinder into the housing till it’s absolutely seated. |
| 5 | Flip the important thing to the unlocked place and take away it. |
| 6 | Take a look at the lock to guarantee that it’s working correctly. |
After getting reassembled the cylinder, you’ll be able to set up it again into the lock. To do that, merely insert the cylinder into the lock physique and switch it till it’s absolutely seated. Then, insert the screws and tighten them till the cylinder is safe.
Putting in the Cylinder Again within the Lock
7. Rigorously align the cylinder with the lock physique. Maintain the cylinder in place with one hand and insert the retaining pin with the opposite hand. Make sure that the retaining pin absolutely engages and secures the cylinder in place. Use a small hammer or screwdriver to softly faucet the retaining pin into its gap if obligatory.
8. As soon as the cylinder is correctly positioned, test if it rotates easily with none obstructions or resistance. The keyway needs to be oriented within the right route to permit for key insertion.
9. Reinstall the lock cowl or escutcheon over the cylinder meeting. Use the screws to safe the quilt in place, making certain a decent match to forestall any play or motion of the cylinder.
10. Confirm the right functioning of the lock by inserting a brand new key and testing the operation. The important thing ought to easily enter the keyway, flip the cylinder, and prolong or retract the bolt as meant.
11. If the brand new key doesn’t function the lock correctly, test for any misalignment or binding within the cylinder meeting. Reposition the cylinder or test if the retaining pin is appropriately engaged. If the issue persists, take away the cylinder once more and seek the advice of the producer’s directions or a locksmith for help.
Putting in the New Key
As soon as the lock cylinder is disengaged and the previous key has been eliminated, it is time to set up the brand new key. Observe these steps to insert the brand new key and full the rekeying course of:
Step 8: Rotate the Cylinder Again into Place
-
With the brand new key within the keyway and the lock cylinder in your hand, fastidiously rotate the cylinder again into place within the lock physique. Be sure that to align the keyway on the cylinder with the keyway on the lock physique. Keep away from pushing the cylinder all the best way in simply but.
-
Whereas holding the lock knob or lever nonetheless, slowly rotate the important thing clockwise and counterclockwise a number of occasions. This helps distribute the tumblers and make sure the new key works easily.
-
Now, push the lock cylinder into the lock physique till it’s absolutely seated. Flip the important thing once more to substantiate that it operates the lock appropriately.
-
If the brand new key works with none points, reassemble the lock by changing the bottom plate, strike plate, and another elements you eliminated through the rekeying course of. Tighten all screws securely.
Testing the Lock
Earlier than trying to rekey your Kwikset lock, it is essential to check the lock to find out if it is in good working situation. Observe these steps to check the lock:
1. Insert a Key into the Lock
Insert the unique key that got here with the lock into the keyhole. If the important thing turns easily and unlocks the door, proceed to the following step.
2. Take away the Lock Cylinder
Take away the screws holding the lock cylinder in place. Utilizing a screwdriver, gently push on the cylinder to take away it from the lock. If the cylinder comes out simply, it is possible that the lock isn’t keyed appropriately.
3. Study the Lock Cylinder
Examine the lock cylinder for any seen injury or put on and tear. Search for bent or damaged pins, as this might point out a broken lock.
4. Take a look at the Lock with a New Key
Insert a brand new key into the lock cylinder. If the important thing turns easily and unlocks the door, it signifies that the lock is functioning correctly and will be rekeyed.
5. Examine the Door Strike
Make sure that the door strike plate is correctly aligned with the lock latch. If the strike plate isn’t aligned, it may forestall the lock from closing fully.
6. Reassemble the Lock
If all of the checks are profitable, reassemble the lock by inserting the lock cylinder again into the lock physique and securing it with screws.
7. Take a look at the Lock Once more
After reassembling the lock, take a look at it once more to verify it is working appropriately. Insert the brand new key and test that it unlocks and locks the door easily.
8. Examine for Tightening
Make sure that the screws holding the lock in place are securely tightened. Unfastened screws could cause the lock to malfunction.
9. Troubleshooting
In case you encounter any points through the testing course of, listed here are some troubleshooting suggestions:
| Drawback | Answer |
|---|---|
| Key would not flip easily | Examine for obstructions within the keyway or broken lock pins. |
| Lock would not unlock the door | Examine the door strike alignment and ensure the lock cylinder is correctly seated. |
| Lock feels free | Tighten the screws holding the lock in place. |
How To Rekey A Kwikset Lock With out A Key
Rekeying a Kwikset lock and not using a key generally is a easy and easy course of that may be accomplished in just a few steps. This is an in depth information on the best way to do it:
- Take away the lock: Begin by eradicating the doorknob or lever from the door. Use a screwdriver to unscrew the screws that maintain it in place.
- Disassemble the lock: As soon as the doorknob or lever is eliminated, you’ll be able to disassemble the lock. Use a screwdriver to take away the screws that maintain the lock collectively and separate the 2 halves of the lock.
- Take away the previous cylinder: Use a pair of pliers to grip the previous cylinder and pull it out of the lock physique.
- Insert the brand new cylinder: Take the brand new cylinder and insert it into the lock physique. Guarantee that the keyway is aligned with the keyhole within the lock physique.
- Set up the lock: Reassemble the lock and set up it again onto the door. Safe it with the screws that you just eliminated earlier.
- Take a look at the lock: Insert a brand new key into the lock and switch it to guarantee that it really works correctly.
Extra Suggestions
Listed here are just a few extra suggestions that may assist you to rekey a Kwikset lock and not using a key:
- If you do not have a brand new cylinder, you should buy one from a ironmongery shop or on-line retailer.
- Guarantee that the brand new cylinder is appropriate together with your Kwikset lock.
- You probably have any difficulties rekeying the lock, you’ll be able to seek the advice of a locksmith for help.
Troubleshooting
If you’re having hassle rekeying your Kwikset lock, right here are some things to test:
- Guarantee that the brand new cylinder is correctly aligned with the keyway within the lock physique.
- Guarantee that the screws that maintain the lock collectively are tightened securely.
- If the lock nonetheless doesn’t work correctly, chances are you’ll want to exchange the complete lock meeting.
Here’s a desk that summarizes the steps concerned in rekeying a Kwikset lock and not using a key:
| Step | Description |
|---|---|
| 1 | Take away the doorknob or lever from the door. |
| 2 | Disassemble the lock. |
| 3 | Take away the previous cylinder. |
| 4 | Insert the brand new cylinder. |
| 5 | Set up the lock. |
| 6 | Take a look at the lock. |
How To Rekey A Kwikset Lock With out A Key
In case you’ve misplaced your keys or want to vary the lock for safety causes, you’ll be able to rekey a Kwikset lock and not using a key. This is the best way to do it:
1. **Collect your supplies.** You have to a small screwdriver, a brand new Kwikset key, and a rekeying equipment.
2. **Take away the lock cylinder.** Use the screwdriver to take away the screws that maintain the lock cylinder in place.
3. **Disassemble the lock cylinder.** Use the rekeying equipment to disassemble the lock cylinder.
4. **Reassemble the lock cylinder with the brand new key.** Use the rekeying equipment to reassemble the lock cylinder with the brand new key.
5. **Set up the lock cylinder.** Insert the lock cylinder into the lock and safe it with the screws.
6. **Take a look at the brand new key.** Insert the brand new key into the lock and switch it to verify it really works.
Individuals Additionally Ask
How do I get a key for a Kwikset lock with out the unique?
You probably have misplaced your Kwikset key, you’ll be able to receive a brand new one by contacting the producer. You have to to supply them with the lock’s serial quantity and proof of buy.
How a lot does it value to rekey a Kwikset lock?
The price of rekeying a Kwikset lock will differ relying on the locksmith you select. Nonetheless, you’ll be able to count on to pay between $50 and $100.
Can I rekey a Kwikset lock myself?
Sure, you’ll be able to rekey a Kwikset lock your self with a rekeying equipment. Nonetheless, you will need to observe the directions fastidiously to keep away from damaging the lock.
