Over the vary microwaves are nice for cooking, particularly if you do not have a lot area. However, they are often troublesome to take away when it’s good to clear them or restore them. Listed below are all of the steps it’s good to take:
First, you may have to disconnect energy to the microwave. Unplug the microwave from the outlet, after which flip off the circuit breaker that powers the outlet. Subsequent, you may have to take away the mounting screws. There are normally 4 screws positioned on the highest of the microwave. Take away these screws utilizing a screwdriver. Now, you may fastidiously carry the microwave up and off of the vary. If the microwave is heavy, you might have to get somebody that will help you.
As soon as the microwave is off the vary, you may clear it or restore it. Be sure you observe the producer’s directions for cleansing or repairing your specific mannequin of microwave. while you’re completed, you may change the microwave on the vary. Merely carry the microwave again into place and safe it with the mounting screws. Lastly, plug the microwave again into the outlet and activate the circuit breaker.
Security Precautions
When eradicating an over-the-range microwave, it’s essential to prioritize security. Listed below are some detailed precautions to observe:
1. Disconnect Electrical energy and Fuel
Earlier than beginning any work:
- Unplug the microwave: Find {the electrical} twine the place it plugs into the wall outlet and unplug it. By no means pull on the twine itself.
- Flip off the circuit breaker: Establish the circuit breaker that powers the microwave and switch it off. It will minimize off {the electrical} provide to the equipment.
- Disconnect the fuel line: In case your microwave is gas-powered, flip off the fuel valve on the foremost fuel line and disconnect the fuel line from the microwave.
Notice: Be sure that the ability and fuel provide are utterly disconnected earlier than continuing with the elimination course of.
Further Ideas:
- Use a non-conductive device to unplug the microwave to keep away from electrical shocks.
- If you’re not snug coping with electrical or fuel connections, seek the advice of a professional electrician or fuel technician for help.
- Screwdriver
- Phillips head bit
- Socket wrench
- 10mm socket
- Drill
- 3/16″ drill bit
- Hammer
- Chisel
- Unplug the microwave from the outlet.
- Take away the screws that safe the microwave to the mounting bracket. These screws are sometimes positioned on the highest and backside of the microwave.
- Rigorously carry the microwave up and off of the mounting bracket.
- Phillips head screwdriver
- Drill
- 1/8-inch drill bit
- Screws
- Drywall anchors
- Maintain the microwave as much as the wall and mark the areas of the mounting holes with a pencil.
- Drill 1/8-inch pilot holes on the marked areas.
- Insert drywall anchors into the pilot holes.
- Drive screws via the mounting holes within the microwave and into the drywall anchors.
- Tighten the screws till the microwave is securely connected to the wall.
| Security Gear | Significance |
|---|---|
| Non-conductive gloves | Protects fingers from electrical shocks |
| Security glasses | Shields eyes from falling particles or fumes |
| Respirator masks | Filters out mud and fumes when working in confined areas |
Instruments and Supplies Required
Important Instruments
* Screwdriver (Phillips and/or flathead)
* Tape measure or ruler
* Stage
* Pencil or marking device
* Security glasses
* Step ladder or stool
Supplies
* New over-the-range microwave (non-compulsory)
* Electrical tape
* Wire nuts
* Caulk gun (non-compulsory)
* Silicone caulk (non-compulsory)
Further Instruments for Advanced Removals
In case your microwave is especially previous or has been put in in an unconventional method, you might want extra instruments resembling:
| Instrument | Goal |
|—|—|
| Wire strippers | To strip insulation from electrical wires |
| Voltage tester | To examine for stay wires |
| Utility knife | To chop via caulking or different sealant |
| Pry bar | To softly pry unfastened cussed fittings |
| Drill | To take away screws which have seized or can’t be turned with a screwdriver |
| Hammer | To faucet on cussed fittings to loosen them |
Disconnecting Electrical Energy
Earlier than you start any work on the microwave, it’s essential to make sure that {the electrical} energy is disconnected. Listed below are the detailed steps to soundly disconnect {the electrical} energy:
1. Find the Circuit Breaker or Fuse Field
Establish the circuit breaker or fuse field that controls the ability provide to the microwave. It’s sometimes labeled with “Microwave” or “Over the Vary.” Flip off the corresponding breaker or take away the suitable fuse.
2. Take a look at the Energy Provide
Utilizing a non-contact voltage tester or multimeter, confirm that the ability is certainly disconnected on the microwave outlet. Contact the tester’s probe to each terminals of the outlet. If the tester doesn’t mild up or the multimeter doesn’t learn any voltage, the ability is efficiently disconnected.
3. Take away the Microwave’s Electrical Connection
As soon as the ability is confirmed to be off, disconnect the microwave’s electrical connection. These steps might fluctuate barely relying on the mannequin and set up:
| Microwave Sort | Disconnection Technique |
|---|---|
| Microwave with a Plug | Unplug the microwave’s energy twine from the outlet. |
| Microwave Hardwired to Electrical Circuit | Flip off the circuit breaker or take away the fuse that controls the microwave’s circuit. Then, use a screwdriver to disconnect {the electrical} wires from the microwave’s terminal block. |
| Microwave with a Junction Field | Find the junction field related to the microwave’s electrical wires. Open the junction field and disconnect the wires from the microwave’s wiring harness. |
Eradicating the Mounting Bracket
To take away the mounting bracket, you may want the next instruments:
Comply with these steps to take away the mounting bracket:
If the microwave is heavy, you might have to have somebody help you in lifting it.
Now you will want to take away the mounting bracket itself. The mounting bracket is often secured to the wall with 4 screws. Find these screws and take away them utilizing a screwdriver or drill. As soon as the screws are eliminated, it is best to have the ability to pull the mounting bracket off of the wall.
If the mounting bracket remains to be caught to the wall, you might want to make use of a hammer and chisel to pry it unfastened. Watch out to not harm the wall when doing this.
Detaching the Microwave from the Cupboard
1. Flip off the Energy
Earlier than starting any work, be certain the ability to the microwave is turned off on the breaker panel. It will forestall any electrical accidents.
2. Take away the Trim
Many over-the-range microwaves have a trim piece that covers the hole between the microwave and the cupboard. This trim can normally be eliminated by unscrewing just a few screws after which pulling it off.
3. Disconnect the Electrical Wiring
As soon as the trim is eliminated, you should have entry to {the electrical} wiring that connects the microwave to the ability provide. Rigorously disconnect these wires, ensuring to notice which wire goes to which terminal.
4. Take away the Mounting Screws
The microwave is often held in place by just a few screws which are positioned on the highest and sides of the unit. Take away these screws utilizing a screwdriver.
5. Decrease the Microwave
As soon as the microwave is indifferent from the cupboard, fastidiously decrease it to the ground. Be sure you help the microwave together with your fingers or a second individual to forestall it from falling and inflicting harm.
Decreasing the Microwave Safely
Over-the-range microwaves might be heavy, so it is very important decrease them fastidiously to keep away from harm or harm. Listed below are some suggestions for decreasing the microwave safely:
| Step | Description |
|---|---|
| 1 | Clear the realm under the microwave of any obstacles. |
| 2 | Get a sturdy step stool or ladder for help. |
| 3 | Have a helper help the opposite finish of the microwave as you fastidiously decrease it. |
| 4 | Bend your knees and preserve your again straight as you decrease the microwave. |
| 5 | As soon as the microwave is on the ground, examine it for any harm. |
Eradicating the Microwave from the Wall
Earlier than eradicating the microwave from the wall, be sure that it’s unplugged from {the electrical} outlet. Additionally, you will want a screwdriver and a drill or energy screwdriver with the suitable bits.
Disconnect the Energy
Find {the electrical} outlet that the microwave is plugged into and unplug it.
Take away the Screws
On the highest and backside of the microwave, there will likely be screws which are holding it in place. Use the screwdriver to take away these screws.
Decrease the Microwave
As soon as the screws are eliminated, fastidiously decrease the microwave down from the wall. Be sure you help the burden of the microwave as you do that.
Pull the Microwave Ahead
As soon as the microwave is lowered down, pull it ahead to detach it from the wall mount. Watch out to not harm the microwave or the wall.
Take away the Mount
As soon as the microwave is pulled ahead, you may see the mounting bracket on the wall. Use the drill or energy screwdriver to take away the screws which are holding the bracket in place. As soon as the screws are eliminated, the bracket might be taken off the wall.
| Screw Location | Screw Dimension |
|---|---|
| High of Microwave | #8 x 1″ |
| Backside of Microwave | #10 x 1-1/4″ |
| Mounting Bracket | #12 x 1-1/2″ |
Eradicating the Vent
1. **Pull the vary hood down and away from the wall.** Watch out to not pull too onerous, as you might harm the hood or the wall.
2. **Unplug the vary hood from {the electrical} outlet.**
3. **Take away the screws which are holding the vent in place.** There are sometimes two screws positioned on both aspect of the vent.
4. **Gently pull the vent away from the vary hood.** Watch out to not harm the vent or the vary hood.
5. **Clear the vent with cleaning soap and water.**
6. **Dry the vent utterly.**
7. **Reinstall the vent by following the steps in reverse order.** Be sure you tighten the screws securely.
Further Ideas for Eradicating the Vent
The next desk gives some extra suggestions for eradicating the vent out of your over-the-range microwave.
| Tip | Description |
|---|---|
| Use a screwdriver with the proper measurement bit. | Utilizing a screwdriver with the fallacious measurement bit can harm the screws or the vary hood. |
| Watch out to not overtighten the screws. | Overtightening the screws can harm the vent or the vary hood. |
| Clear the vent recurrently. | Cleansing the vent recurrently will assist to forestall grease and particles from build up and inflicting issues. |
Reinstalling the Vent
1. Take away the screws that safe the vent to the microwave.
2. Disconnect the vent from the microwave by pulling it straight out.
3. Clear the vent with cleaning soap and water.
4. Examine the vent for any harm. If the vent is broken, it can have to be changed.
5. Reinstall the vent by sliding it again into place.
6. Safe the vent with screws.
7. Reconnect the vent to the microwave.
8. Take a look at the vent to ensure it’s working correctly. To do that, activate the microwave and place a cup of water within the microwave. The vent ought to begin to suck the air out of the microwave. If the vent shouldn’t be working correctly, examine the vent for any obstructions.
| Reinstalling the Vent | |
|---|---|
| 1. | Take away the screws that safe the vent to the microwave. |
| 2. | Disconnect the vent from the microwave by pulling it straight out. |
| 3. | Clear the vent with cleaning soap and water. |
| 4. | Examine the vent for any harm. If the vent is broken, it can have to be changed. |
| 5. | Reinstall the vent by sliding it again into place. |
| 6. | Safe the vent with screws. |
| 7. | Reconnect the vent to the microwave. |
| 8. | Take a look at the vent to ensure it’s working correctly. |
Reattaching the Microwave to the Wall
After you have eliminated the microwave from the wall, you will want to reattach it securely. To do that, you will want the next instruments:
Listed below are the steps on the right way to reattach the microwave to the wall:
Here’s a desk summarizing the steps to reattach the microwave to the wall:
| Step | Description |
|---|---|
| 1 | Maintain the microwave as much as the wall and mark the areas of the mounting holes with a pencil. |
| 2 | Drill 1/8-inch pilot holes on the marked areas. |
| 3 | Insert drywall anchors into the pilot holes. |
| 4 | Drive screws via the mounting holes within the microwave and into the drywall anchors. |
| 5 | Tighten the screws till the microwave is securely connected to the wall. |
After you have reattached the microwave to the wall, you may plug it again in and take a look at it to ensure it’s working correctly.
Restoring Electrical Energy
As soon as the microwave is eliminated, you will want to revive electrical energy to the circuit. To do that, observe these steps:
1. Flip off the circuit breaker or fuse that powers the microwave circuit.
2. Take away the faceplate from {the electrical} field the place the circuit breaker or fuse is positioned.
3. Find the circuit breaker or fuse that’s tripped or blown.
4. Reset the circuit breaker by flipping it again to the “on” place. If the fuse is blown, change it with a brand new fuse of the identical amperage.
5. Reinstall the faceplate on {the electrical} field.
6. Activate the circuit breaker or fuse to revive energy to the microwave circuit.
7. Take a look at the microwave to ensure it’s working correctly.
Further Ideas for Restoring Electrical Energy
* If you’re not snug working with electrical energy, it’s best to name a professional electrician to revive energy to the microwave circuit.
* Be sure that the circuit breaker or fuse that you’re resetting or changing is the proper one for the microwave circuit.
* If the circuit breaker or fuse journeys or blows once more after you might have reset or changed it, there could also be an issue with the microwave or the wiring. On this case, it is best to name a professional electrician to troubleshoot the issue.
| Circuit Breaker or Fuse Amperage | Microwave Wattage |
|---|---|
| 15 amps | As much as 1500 watts |
| 20 amps | 1501 to 2000 watts |
| 30 amps | 2001 to 3000 watts |
How To Take away Over The Vary Microwave
Step 1: Flip off the ability to the microwave. That is sometimes achieved by unplugging the microwave from {the electrical} outlet. Nonetheless, for those who can’t unplug the microwave, you may flip off the ability on the circuit breaker panel.
Step 2: Take away the trim package. The trim package is the ornamental piece that surrounds the microwave. It’s sometimes held in place by screws or clips. To take away the trim package, merely unscrew or unclip the screws or clips and pull the trim package away from the microwave.
Step 3: Disconnect the ability twine. The facility twine is positioned behind the microwave. To disconnect the ability twine, merely unplug it from the outlet.
Step 4: Take away the mounting screws. The mounting screws are positioned on the highest and backside of the microwave. To take away the mounting screws, merely flip them counterclockwise with a screwdriver.
Step 5: Decrease the microwave. As soon as the mounting screws have been eliminated, you may decrease the microwave by fastidiously lifting it up and away from the wall. Be sure you have somebody help you with this step to forestall the microwave from falling.
Step 6: Take away the microwave from the cupboard. As soon as the microwave has been lowered, you may take away it from the cupboard by fastidiously pulling it straight out.
Individuals Additionally Ask
How do I take away the over the vary microwave trim package?
To take away the trim package, merely unscrew or unclip the screws or clips which are holding it in place. As soon as the screws or clips have been eliminated, pull the trim package away from the microwave.
How do I disconnect the ability twine from the over the vary microwave?
To disconnect the ability twine from the microwave, merely unplug it from the outlet.
How do I take away the mounting screws from the over the vary microwave?
To take away the mounting screws, merely flip them counterclockwise with a screwdriver.
How do I decrease the over the vary microwave?
As soon as the mounting screws have been eliminated, you may decrease the microwave by fastidiously lifting it up and away from the wall. Be sure you have somebody help you with this step to forestall the microwave from falling.
How do I take away the over the vary microwave from the cupboard?
As soon as the microwave has been lowered, you may take away it from the cupboard by fastidiously pulling it straight out.
