In case your cigarette lighter has stopped working, one potential trigger could possibly be a blown fuse. Changing a cigarette lighter fuse is a comparatively easy activity that may be accomplished in only a few minutes. On this article, we are going to give you step-by-step directions on how you can substitute the fuse.
Earlier than you start, you will need to collect the mandatory instruments and supplies. You will want a brand new fuse that’s the similar amperage because the outdated fuse, a pair of needle-nose pliers, and a small screwdriver. Upon getting gathered your instruments and supplies, you possibly can comply with the steps beneath to switch the fuse.
First, find the fuse field. The fuse field is usually positioned underneath the dashboard, however it could be positioned in a distinct location relying on the make and mannequin of your automobile. Upon getting positioned the fuse field, open it and discover the fuse that’s labeled “cigarette lighter.” The fuse will probably be a small, glass tube with a steel cap on every finish. Use the needle-nose pliers to take away the outdated fuse. Then, insert the brand new fuse into the fuse field and snap it into place. Lastly, shut the fuse field and take a look at the cigarette lighter to verify it’s working correctly.
Find the Fuse Field
The fuse field in your automobile is liable for defending {the electrical} system from overloads and brief circuits. When a fuse blows, it interrupts the circulate of electrical energy to the affected circuit. The cigarette lighter is usually powered by a fuse, so if it stops working, you might want to switch the fuse.
The placement of the fuse field can fluctuate relying on the make and mannequin of your automobile. Normally, it is going to be positioned underneath the dashboard on the motive force’s aspect. Nonetheless, it could even be positioned within the engine compartment or within the trunk. If you cannot discover the fuse field, seek the advice of your automobile’s proprietor’s guide.
Upon getting positioned the fuse field, open it up and seek the advice of the diagram on the within of the duvet. This diagram ought to present you which ones fuse is liable for the cigarette lighter. Upon getting recognized the proper fuse, use a fuse puller to take away it from the fuse field. You may then examine the fuse to see if it has blown. If the steel filament contained in the fuse is damaged, it has blown and must be changed.
| Fuse Location | Fuse Sort |
|---|---|
| Underneath the dashboard on the motive force’s aspect | Mini fuse |
| Within the engine compartment | Maxi fuse |
| Within the trunk | Blade fuse |
Establish the Cigarette Lighter Fuse
Find the fuse field that corresponds to your particular automobile. Confer with your proprietor’s guide for exact directions on the situation of the fuse field. Usually, fuse bins are located in simply accessible areas akin to underneath the dashboard, inside the engine compartment, or contained in the glove compartment.
Upon getting recognized the fuse field, rigorously look at the fuses for indicators of injury or burn marks. A blown fuse may have a damaged or melted wire filament inside. Verify every fuse meticulously till you find the one liable for the cigarette lighter.
The cigarette lighter fuse is usually labeled with a particular designation akin to “CIG” or “ACCESSORY.” For those who can not determine the cigarette lighter fuse, seek the advice of your proprietor’s guide or search help from a professional mechanic.
Collect Essential Instruments
Alternative Fuse
Receive a appropriate substitute fuse to your automobile’s cigarette lighter. Seek the advice of the proprietor’s guide or fuse panel diagram to find out the proper amperage score. The fuse field may have a small diagram on the within of the lid that exhibits which fuse powers the cigarette lighter.
Fuse Puller or Needle-Nostril Pliers
A fuse puller is a specialised instrument designed to soundly take away fuses. If you do not have a fuse puller, you should utilize a pair of needle-nose pliers with insulated handles to grip the fuse.
Flashlight or Work Gentle
In dimly lit areas, a flashlight or work mild might help you find the fuse field and determine the proper fuse.
Further Instruments (Optionally available)
| Multi-meter (to check fuse continuity) |
| Alternative fuse faucets (to bypass a blown fuse) |
Take away the Previous Fuse
Changing a cigarette lighter fuse is an easy activity that requires just a few easy steps. For those who’re a smoker who makes use of a cigarette lighter, you will seemingly want to switch the fuse in some unspecified time in the future. This is a information on how you can do it safely and simply:
Earlier than you begin, collect the next supplies:
- A brand new cigarette lighter fuse
- A pair of needle-nose pliers or tweezers
- A flashlight
Upon getting gathered your supplies, comply with these steps:
- **Find the fuse field**: Seek the advice of your proprietor’s guide to search out the precise location of the fuse field in your automobile. In most autos, it’s positioned both underneath the dashboard on the motive force’s aspect or within the engine compartment. The fuse field is an oblong plastic housing that incorporates a number of fuses, which shield totally different electrical elements in your automobile, together with the cigarette lighter.
- **Open the fuse field**: Use a flathead screwdriver or your fingers to open the fuse field. Watch out to not harm the fuse field or its contents.
- **Find the cigarette lighter fuse**: The cigarette lighter fuse is normally labeled on the within of the fuse field cowl. If it is not labeled, you possibly can confer with your automobile’s proprietor’s guide to determine it.
- **Take away the outdated fuse**: Use a pair of needle-nose pliers or tweezers to drag the outdated fuse out of its socket. Watch out to not contact the steel contacts on the top of the fuse.
- **Insert the brand new fuse**: Take the brand new fuse and insert it into the socket the place the outdated fuse was positioned. Make it possible for the fuse is inserted accurately, with the steel contacts going through the proper course.
- **Shut the fuse field**: Exchange the fuse field cowl and ensure it’s securely closed.
Insert the New Fuse
Now that you’ve your new fuse, it is time to insert it into your automobile’s fuse field. Earlier than you begin, be sure that your automobile is turned off and utterly cooled down. Use a clear, dry fabric to deal with the fuse, as oil or grime out of your palms can harm it.
Find the fuse field in your automobile. It’s normally positioned underneath the dashboard on the motive force’s aspect. Upon getting discovered the fuse field, open it up and find the fuse that corresponds to the cigarette lighter. The fuse will probably be labeled with the amperage score, which is usually 10 amps or 15 amps. Take away the outdated fuse by gently pulling it out along with your fingers or utilizing a pair of pliers.
| Amperage Ranking | Fuse Shade |
|---|---|
| 0.5-1 amp | Inexperienced |
| 2 amp | Blue |
| 3 amp | Inexperienced |
| 5 amp | Crimson |
| 7.5 amp | Yellow |
| 10 amp | Crimson |
| 15 amp | Blue |
| 20 amp | Yellow |
| 25 amp | Crimson |
| 30 amp | Blue |
Insert the brand new fuse into the fuse slot. Make certain the fuse is inserted accurately, with the steel ends going through the proper course. Exchange the fuse field cowl and tighten any screws.
Begin your automobile and test to see if the cigarette lighter is working once more. Whether it is, then you’ve got efficiently changed the cigarette lighter fuse.
Check the Cigarette Lighter
To check if the cigarette lighter is the issue, you possibly can attempt plugging in one other system that makes use of the identical kind of energy outlet. If the opposite system works, then the issue is probably going with the cigarette lighter itself. If the opposite system does not work, then the issue could also be with the fuse.
Verify for any seen harm to the cigarette lighter, akin to cracks or burns. If there’s any harm, it’s best to switch the cigarette lighter.
If there isn’t any seen harm, you possibly can attempt cleansing the cigarette lighter with a cotton swab and rubbing alcohol. This can take away any grime or particles that could be stopping the cigarette lighter from working.
If the cigarette lighter nonetheless doesn’t work after cleansing, then you’ll need to switch the fuse.
**Security First:** Earlier than you start working in your automobile’s electrical system, be sure you disconnect the adverse battery terminal. This can assist to forestall any electrical shocks.
**Instruments and Supplies:**
| Instrument | Function |
|---|---|
| Phillips screwdriver | To take away the fuse panel cowl |
| Fuse puller | To take away the outdated fuse |
| New fuse | To exchange the outdated fuse |
**Steps:**
1. Find the fuse panel. It’s normally positioned underneath the dashboard on the motive force’s aspect.
2. Take away the fuse panel cowl.
3. Find the fuse for the cigarette lighter. It will likely be labeled “Cigarette Lighter” or “Energy Outlet”.
4. Take away the outdated fuse utilizing a fuse puller.
5. Insert the brand new fuse into the fuse slot.
6. Exchange the fuse panel cowl.
7. Reconnect the adverse battery terminal.
8. Check the cigarette lighter to verify it’s working correctly.
Troubleshooting Frequent Points
For those who’re having bother changing your cigarette lighter fuse, right here are some things to test:
1. Make certain the brand new fuse has the proper amperage. The amperage is printed on the aspect of the fuse. If the fuse is just too excessive or too low of an amperage, it may trigger harm to your automobile.
2. Make certain the fuse is correctly seated within the fuse block. The fuse ought to match snugly into the fuse block. If the fuse isn’t correctly seated, it may trigger a poor connection and forestall the cigarette lighter from working.
3. Make certain the cigarette lighter socket is clear. Over time, the cigarette lighter socket can grow to be soiled or corroded. This may stop the cigarette lighter from making a very good connection and dealing correctly.
4. Make certain the wiring to the cigarette lighter isn’t broken. The wiring to the cigarette lighter can grow to be broken over time, particularly whether it is uncovered to the weather. If the wiring is broken, it may stop the cigarette lighter from working correctly.
5. Verify the cigarette lighter itself. The cigarette lighter itself may be broken and should have to be changed if it’s not making a very good connection or working correctly
6. Verify for some other points that could be inflicting the cigarette lighter to not work. There could possibly be different points inflicting the cigarette lighter to not work, akin to an issue with the ignition swap or {the electrical} system.
Fuse Amperage Chart for Cigarette Lighter Socket
| Car Make | Fuse Amperage |
|---|---|
| Chevrolet | 10A |
| Ford | 15A |
| Toyota | 10A |
| Honda | 5A |
Be aware: Confer with your automobile’s proprietor’s guide for particular fuse amperage and site.
Security Precautions
Earlier than changing the cigarette lighter fuse, it’s essential to take the next security precautions:
- Disconnect the Battery: Disconnect the adverse terminal of the battery to forestall any electrical shock or brief circuit.
- Put on Gloves: Put on insulated gloves to guard your palms from touching the fuse and surrounding electrical elements.
- Use Insulated Instruments: Make use of insulated instruments like screwdrivers and pliers to keep away from electrical contact.
- Examine the Fuse: Look at the outdated fuse for any harm, akin to breaks or burn marks. Broken fuses must be changed instantly.
- Use the Appropriate Fuse: Exchange the fuse with one of many similar amperage score as the unique. Utilizing a higher-rated fuse can result in electrical harm.
- Tighten Connections: Be certain that all electrical connections are correctly tightened to forestall unfastened wires.
- Examine Wiring: If the fuse has blown repeatedly, examine the wiring for any shorts or harm.
- Keep away from Sparking: Don’t contact the fuse terminals or the uncovered steel elements of the fuse holder whereas the ignition is on or the battery is related.
- Check the Circuit: After changing the fuse, reconnect the adverse battery terminal and take a look at the cigarette lighter to make sure it’s functioning accurately.
Skilled Help
In case you are uncomfortable performing electrical repairs or lack the mandatory instruments, it’s extremely really useful to hunt skilled help. A certified mechanic can substitute the cigarette lighter fuse shortly and safely, making certain that your automobile’s electrical system stays in optimum situation.
Relying on the complexity of the restore and the hourly labor price of the mechanic, the price of skilled help could fluctuate. It’s advisable to acquire a quote earlier than continuing with the restore.
Listed here are the steps concerned in changing the cigarette lighter fuse with skilled help:
- Contact a good mechanic or automotive restore store.
- Clarify the issue and schedule an appointment.
- Deliver your automobile to the restore facility on the scheduled time.
- The mechanic will examine the fuse field and determine the blown cigarette lighter fuse.
- The mechanic will take away the blown fuse and substitute it with a brand new one of many appropriate amperage.
- The mechanic will take a look at the cigarette lighter to make sure correct performance.
- The mechanic will present an bill for the service carried out.
| Execs | Cons |
|---|---|
| Skilled workmanship and accuracy | Greater price in comparison with DIY restore |
| Peace of thoughts understanding the restore was completed accurately | Might require scheduling an appointment |
| Restricted guarantee or assure on the restore | Potential lack of quick availability of mechanic |
Learn how to Exchange Cigarette Lighter Fuse
Changing a blown cigarette lighter fuse is a comparatively easy activity that may be accomplished in a couple of minutes. Listed here are the steps on how you can do it:
- Find the fuse field. The fuse field is usually positioned underneath the dashboard on the motive force’s aspect. Seek the advice of your automobile’s proprietor’s guide for the precise location.
- Establish the cigarette lighter fuse. The fuse field may have a diagram that identifies the situation of every fuse. Discover the fuse that’s labeled “cigarette lighter” or “energy outlet”.
- Take away the blown fuse. Use a fuse puller or a pair of needle-nose pliers to take away the blown fuse from the fuse field.
- Set up the brand new fuse. Insert a brand new fuse of the identical amperage because the blown fuse into the fuse field. Make it possible for the fuse is pushed in all the way in which.
- Check the cigarette lighter. Activate the ignition and insert a cigarette lighter into the socket. If the lighter works, then the fuse has been changed efficiently.
Individuals Additionally Ask About Learn how to Exchange Cigarette Lighter Fuse
The place is the fuse for the cigarette lighter?
The fuse for the cigarette lighter is usually positioned within the fuse field underneath the dashboard on the motive force’s aspect. Seek the advice of your automobile’s proprietor’s guide for the precise location.
What amperage fuse do I would like for the cigarette lighter?
The amperage of the fuse you want for the cigarette lighter will rely in your automobile. Seek the advice of your automobile’s proprietor’s guide for the proper amperage.
Can I substitute the cigarette lighter fuse myself?
Sure, changing the cigarette lighter fuse is a comparatively easy activity that may be accomplished in a couple of minutes. Comply with the steps outlined above to do it your self.
