Folding your Tommy Bahama chair will not be a tough process, nevertheless it does require a little bit of observe. However when you get the hold of it, you’ll fold it down in seconds. Listed below are the steps on find out how to do it:
First, guarantee that the chair is totally open. Then, seize the 2 aspect arms of the chair and pull them in the direction of one another. This can trigger the chair to begin to fold in half. As soon as the chair is midway folded, you may then push down on the seat of the chair to finish the fold.
To unfold the chair, merely reverse the steps. Pull the 2 aspect arms of the chair aside till it’s fully open. Then, push down on the seat of the chair to lock it into place. With a little bit observe, you’ll fold and unfold your Tommy Bahama chair very quickly.
Unlocking the Mechanism
The Tommy Bahama chair contains a distinctive locking mechanism that retains it securely in place when open. To shut the chair, you will must first unlock this mechanism. Here is an in depth information:
- Find the discharge lever: The discharge lever is often positioned on the aspect of the chair, close to the underside. It is normally a small, lever-like button or knob.
- Establish the latch: On the alternative aspect of the chair, you will see a latch that engages with the discharge lever. This latch is what retains the chair locked in place.
- Push the discharge lever: Whereas holding the latch in place, push the discharge lever upwards. This can disengage the latch, permitting you to shut the chair.
Detaching the Body
To detach the body from the bottom, find the 4 latches on the corners of the chair. These latches are sometimes black and manufactured from plastic. Use a screwdriver or a coin to press down on the latch and carry it up. The body ought to now be free from the bottom.
As soon as the latches are launched, rigorously carry the body off the bottom. Watch out to not pinch your fingers or harm the body.
If you’re having problem detaching the body, attempt utilizing a lubricant equivalent to WD-40 on the latches. Alternatively, you may contact Tommy Bahama customer support for help.
Desk of Latches
| Latch Location |
Directions |
| Prime left nook |
Use a screwdriver or a coin to press down on the latch and carry it up. |
| Prime proper nook |
Use a screwdriver or a coin to press down on the latch and carry it up. |
| Backside left nook |
Use a screwdriver or a coin to press down on the latch and carry it up. |
| Backside proper nook |
Use a screwdriver or a coin to press down on the latch and carry it up. |
Eradicating the Cloth
First, flip the chair the wrong way up. Find the small screws which are holding the material in place and take away them utilizing a screwdriver. As soon as the screws are eliminated, you may rigorously carry the material off the body of the chair. Watch out to not tear the material as you take away it.
| Step |
Description |
| 1 |
Flip the chair the wrong way up. |
| 2 |
Find the small screws which are holding the material in place. |
| 3 |
Take away the screws utilizing a screwdriver. |
| 4 |
Rigorously carry the material off the body of the chair. |
Subsequent, it’s essential to take away the previous material from the cushions. To do that, merely unzip the cushions and take away the previous material. Watch out to not harm the cushions as you take away the material.
Inspecting the Elements
Earlier than making an attempt to shut your Tommy Bahama chair, it is important to totally examine the parts to make sure they’re in good working order. Listed below are the important thing parts to examine:
Body and Cloth
Examine the chair’s body for any indicators of injury or rust. Be sure that all connections are safe and there aren’t any unfastened bolts or screws. Additionally, examine the material for any tears, stains, or fading. If any harm is discovered, it ought to be addressed earlier than closing the chair.
Cushions
Look at the cushions for any lumps, indentations, or lack of assist. Make it possible for the cushions are securely hooked up to the chair and that there aren’t any unfastened or lacking buttons or zippers.
Locking Mechanism
Find the locking mechanism accountable for holding the chair open. Be sure that it’s functioning accurately and that the locking pins are securely engaged. If the mechanism will not be working correctly, it could forestall the chair from closing safely.
Different Elements
Along with the above, examine all different parts of the chair, together with the armrests, footrest, and any equipment. Make it possible for every part is in good situation and correctly hooked up.
| Part |
What to Examine |
| Body |
Harm, rust, unfastened bolts |
| Cloth |
Tears, stains, fading |
| Cushions |
Lumps, indentations, safe attachment |
| Locking Mechanism |
Functioning accurately, locking pins engaged |
| Armrests |
Good situation, correctly hooked up |
| Footrest |
Good situation, correctly hooked up |
| Equipment |
Correctly hooked up, good situation |
Tightening Unfastened Joints
Over time, the joints of your Tommy Bahama chair could turn out to be unfastened. This may be attributable to quite a lot of components, equivalent to put on and tear, publicity to the weather, or just the passage of time. Unfastened joints could make your chair unstable and uncomfortable to sit down in. Thankfully, tightening unfastened joints is a comparatively easy process that may be accomplished in a couple of minutes with the appropriate instruments.
To tighten unfastened joints, you will want the next instruments:
| Software |
Description |
| Allen wrench |
A small wrench with a hexagonal head |
| Screwdriver |
A small screwdriver with a flat head |
| Hammer |
A small hammer |
After you have gathered your instruments, observe these steps to tighten unfastened joints in your Tommy Bahama chair:
1. Examine the chair to determine the unfastened joints. Search for joints which are wobbly or have gaps between the items of wooden.
2. Use the Allen wrench to tighten the bolts or screws which are holding the unfastened joints collectively. Flip the wrench clockwise till the joint is comfortable.
3. If the joint remains to be unfastened, use the screwdriver to tighten the screws which are holding the joint collectively. Flip the screwdriver clockwise till the joint is comfortable.
4. If the joint remains to be unfastened, use the hammer to softly faucet the joint again into place. Watch out to not hit the joint too exhausting, as this might harm the wooden.
5. As soon as the joint is tight, use a moist fabric to wipe away any grime or particles from the joint. This can assist to forestall the joint from loosening once more sooner or later.
Lubricating Transferring Elements
Lubricating shifting elements is important to make sure clean and correct functioning of your Tommy Bahama chair, in addition to to forestall untimely put on and tear. To do that, you will want a silicone-based lubricant or a lubricant particularly designed for outside furnishings. Earlier than making use of any lubricant, clear all shifting elements with a moist fabric to take away any grime or particles.
As soon as the elements are clear, apply a small quantity of lubricant to every shifting half, equivalent to hinges, joints, and swivel mechanisms. Use a cotton swab or a small brush to use the lubricant evenly, being cautious to not over-lubricate. Wipe away any extra lubricant to forestall attracting grime and particles.
The next desk offers an in depth information on which particular shifting elements to lubricate:
| Transferring Half |
Location |
| Hinges |
The place the backrest connects to the seat |
| Joints |
The place the arms connect with the backrest and seat |
| Swivel Mechanism |
Beneath the seat, the place the chair rotates |
| Gliders |
On the underside of the legs, if relevant |
By following these steps and lubricating shifting elements often, you may preserve your Tommy Bahama chair working easily and lengthen its lifespan.
Reassembling the Body
As soon as the body is disassembled, it is time to put it again collectively. Listed below are the steps:
1. Insert the Again Relaxation
Align the again relaxation with the corresponding slots on the aspect panels. Slide the again relaxation into place till it snaps securely.
2. Connect the Seat Again
Lay the seat again on high of the body and align the holes with the bolts on the aspect panels. Insert the bolts and tighten them with a wrench.
3. Set up the Armrests
Connect the armrests to every aspect of the chair body. Use the screws supplied to safe them.
4. Insert the Seat
Place the seat on high of the body and safe it with the screws supplied.
5. Add the Again Cushion
Place the again cushion on high of the again relaxation and fix it with the straps or Velcro supplied.
6. Connect the Seat Cushion
Place the seat cushion on high of the seat and fix it with the straps or Velcro supplied.
7. Tighten the {Hardware}
Utilizing a wrench or screwdriver, tighten all of the nuts and bolts to make sure the chair is sturdy and safe. Pay particular consideration to the bolts connecting the seat again to the aspect panels, as these bear essentially the most weight.
| Software |
Use |
| Wrench |
Tightening bolts |
| Screwdriver |
Tightening screws |
Congratulations! You could have now efficiently reassembled your Tommy Bahama chair.
Reattaching the Cloth:
8. Hooking the Cloth Again into Place
**Detailed Steps:**
| Step |
Directions |
| a) |
Find the metallic hooks hooked up to the body across the edges of the chair. |
| b) |
Fold the material edges again, revealing the plastic spikes on the again of the material. |
| c) |
Align the plastic spikes with the metallic hooks. The spikes ought to match snugly into the hooks. |
| d) |
Maintain the material taut whilst you hook every spike into its corresponding hook. |
| e) |
Pull the material firmly and distribute it evenly across the body. |
| f) |
Safe the material with the supplied bungee cords or leather-based straps. |
**Ideas:**
- Use a flashlight that will help you see contained in the chair body.
- If the material does not match snugly, modify the bungee cords or leather-based straps.
- Be affected person and take your time to make sure the material is securely hooked up.
Locking the Mechanism
The Tommy Bahama chair has a novel locking mechanism that secures the chair in a reclined place. To lock the mechanism, merely push down on the lever positioned on the appropriate aspect of the chair, close to the bottom of the backrest. You’ll hear a click on when the mechanism is engaged. As soon as locked, the chair will stay within the reclined place till you unlock it.
Unlocking the Mechanism
To unlock the mechanism, merely carry up on the lever positioned on the appropriate aspect of the chair, close to the bottom of the backrest. You’ll hear a click on when the mechanism is disengaged. As soon as unlocked, the chair could be moved again to the upright place.
Adjusting the Recline Angle
The Tommy Bahama chair could be reclined to any angle as much as 170 levels. To regulate the recline angle, merely lean again within the chair and use your weight to regulate the angle. The chair will stay within the place you select till you modify it once more.
Securing the Chair
To make sure that the chair is safe within the reclined place, you will need to lock the mechanism. This can forestall the chair from shifting again to the upright place in the event you lean again too far.
Disengaging the Mechanism
To disengage the mechanism, merely carry up on the lever positioned on the appropriate aspect of the chair, close to the bottom of the backrest. You’ll hear a click on when the mechanism is disengaged. As soon as disengaged, the chair could be moved again to the upright place.
Utilizing the Armrests
The armrests on the Tommy Bahama chair are adjustable to offer extra consolation and assist. To regulate the armrests, merely push down on the button positioned on the within of every armrest and transfer the armrests to the specified place.
Storing the Chair
When not in use, the Tommy Bahama chair could be simply saved away. To retailer the chair, merely fold it in half and safe it with the Velcro strap supplied.
Submit-Upkeep Care
As soon as you have adopted the steps above to shut your Tommy Bahama chair, it is necessary to take correct care to make sure its longevity and stop any harm.
Storage
Retailer the chair in a dry, well-ventilated space away from direct daylight. Keep away from storing it in damp or humid environments, as this will result in mould or mildew development.
Cleansing
Often clear the chair with a mushy, damp fabric. Keep away from utilizing harsh chemical substances or detergents, as these can harm the material or body.
Tightening
Over time, the bolts and screws on the chair could turn out to be unfastened. Periodically examine them for tightness and modify as mandatory.
Lubrication
If the chair’s shifting elements turn out to be stiff, you may apply a small quantity of lubricant to the joints. Use a lubricant particularly designed for outside furnishings.
Safety
To guard the chair from the weather, contemplate overlaying it with a furnishings cowl when it isn’t in use. This can protect it from solar, rain, and dirt.
Repairs
If the chair sustains any harm, equivalent to a torn material or a damaged body, get it repaired promptly. This can forestall additional deterioration and guarantee your chair stays in good situation.
Common Inspection
Often examine the chair for any indicators of wear and tear or harm. By addressing minor points early on, you may forestall them from turning into extra vital and expensive.
Guarantee
Most Tommy Bahama chairs include a guaranty. Discuss with the producer’s guarantee data for particulars on protection and procedures for submitting a declare.
Extra Care
For optimum care, keep away from leaving the chair uncovered to excessive temperatures or extended intervals of rain or snow. If the chair will get moist, dry it totally earlier than storing it.
| Upkeep Activity |
Frequency |
| Cleansing |
Often |
| Tightening |
Periodically |
| Lubrication |
As wanted |
| Safety |
When not in use |
| Repairs |
Promptly |
How To Shut A Tommy Bahama Chair
To shut a Tommy Bahama chair, observe these steps:
- Find the 2 launch levers on the edges of the chair.
- Squeeze the discharge levers collectively.
- Fold the chair in half.
- Safe the chair closed by hooking the latch on the underside of the chair onto the hook on the highest of the chair.
As soon as the chair is closed, it may be saved or transported simply.
Folks Additionally Ask About How To Shut A Tommy Bahama Chair
How To Open A Tommy Bahama Chair?
To open a Tommy Bahama chair, observe these steps:
- Find the latch on the underside of the chair.
- Unhook the latch from the hook on the highest of the chair.
- Unfold the chair.
- Lock the chair open by squeezing the discharge levers on the edges of the chair collectively.
As soon as the chair is open, it’s prepared for use.
How To Clear A Tommy Bahama Chair?
To scrub a Tommy Bahama chair, observe these steps:
- Use a mushy fabric dampened with water to wipe down the chair.
- For more durable stains, use a gentle cleaning soap and water resolution.
- Rinse the chair with clear water.
- Enable the chair to air dry.
Don’t use harsh chemical substances or abrasive cleaners on the chair, as this will harm the end.
How To Retailer A Tommy Bahama Chair?
To retailer a Tommy Bahama chair, observe these steps:
- Shut the chair based on the steps outlined above.
- Retailer the chair in a dry, cool place.
- Cowl the chair with a tarp or plastic bag to guard it from mud and grime.
By following the following tips, you may preserve your Tommy Bahama chair wanting its finest for years to come back.
